49
L4000G4
www.NewLeader.com
(800) 363-1771
307074-AA-I
General Description
The L4000G4 is a hopper type spreader intended for spreading free flowing granular agricultural
materials, such as chemical fertilizers, agricultural limestone, and gypsum� It is intended for agricultural
vehicle mounting�
The unit is powered hydraulically and provides variable speed control for the spinner and full automatic
ground speed control for the conveyor�
The conveyor delivers material to the spinners through an adjustable metering gate at the rear of the
hopper body� Orbital type hydraulic motors mounted to 6 to 1 ratio spur gear case on the L4000G4 drive
the conveyor� The conveyor options include a pintle type chain joined by cross bars every (#3) link or a
belt-over-chain type having parallel strands of pintle type (#4) chain joined by cross bars every other link�
The spinner assembly has two 24-inch (610mm) diameter dished discs� Each disc has four formed
and heat treated fins that are adjustable to radial angle. The spinner is fully adjustable by means of a
rotating handle�
The optional 304 stainless steel hopper style spreader MultApplier or MultiBin may be insterted in the
main bin�
Inserting the MultApplier allows for two materials to be spread simultaneously� It features a 24-inch
(610mm) belt-over-chain type conveyor having parallel strands of pintle type (#4) chain joined by cross
bars every other link� The direct driven conveyor is also controlled independently enabling the delivery
of material at variable rates through the adjustable gate at the rear of the hopper body� The hillside
divider improves material placement on the spinner for a more effective spread pattern�
Inserting the MultiBin will convert the spreader to a 3 or 4 hopper unit, which can be used independently
or together for straight and variable rate applications� The front two hoppers dispense fertilizer products
while the single or dual hopper at the rear dispense(s) micronutrients or seeding products� The rear
bin(s) are sloped forward to improve chassis weight distribution� Material is delivered from the front
bin by conveyor and from the rear bin(s) by passing through a meter wheel, material dividers and main
spinner assembly with 24-inch (610mm) diameter dished discs� Bin sensors are installed to warn when
materials are low in each micronutrient bin�
The MultiBin also comes equipped with an upper and lower material divider which improves material
placement on the spinner for a more effective spread pattern�
An optional micronutrient stainless steel cover which opens and closes with a stainless steel air cylinder is
available�
Screens installed on micronutrient bins keep large chunks of material out of the bins by breaking the
material up as it enters the bins�
This product is intended for commercial use only�
