New Image FG01, Assembly And User'S Manual

Page: 5 / 16

QUICK-START GUIDE:
Your FITT Gym arrives almost ready-assembled.
1. Lay the box flat and open at the top. Remove all packaging materials.
2. Carefully remove the main unit and attachments from the box, laying them out on
the floor.
3. For incline orientation, lift the main unit with your right hand at end closest to
pads (top end). With left hand attach the incline leg (part #2) to “top” end of the
main unit (part #1). Ensure the incline leg (part #2) is correctly positioned into
main unit with locating pin fully inserted, threading the long star screws (part
#5b) into the holes at the top of the incline for extra stability. Ensure the screws
are tight before use.
4. Insert the roller bar (part #3) at
the top end and horseshoe bar
(part #4) at the bottom of the
unit. Press bars into position.
Both bars are secured in place
once the push button pops into
position.
To remove the bars, hold them
from behind with the push
buttons facing forward, press
the push buttons in with your
fingers or thumbs, wrap your
hand around the bar and lift.
5. When you’re ready to use the FITT
Gym, remove the two safety rods
(part #7) from the top pads, bearing
in mind that the pads will naturally
drop down the track due to gravity.
A
Safety rod
Push
button
Removing the pin lock handles
5