background image

not in use and unsupervised.

• 

Parents and others in charge of children should be aware of their responsibility 

because the natural play instinct and the fondness of experimenting of children can 

lead to situations and behaviour for which the training equipment is not intended.

• 

This product is not intended for use by persons with reduced physical, sensory or 

mental capabilities, or lack of experience and knowledge, unless they have been 

given supervision or instruction concerning the use of the appliance by a person 

responsible for their safety.

• 

This product is not suitable for therapeutic purposes.

• 

This product is intended for home use only.

• 

Do not stand on pads in incline configuration.

• 

Do not kneel on pads when using pulleys.

• 

Ensure pads are dry before use. 

• 

Only use accessory items recommended by the manufacturer.

• 

CAUTION the instructions must be followed carefully in the assembly, use and 

maintenance of the equipment.

• 

Safety standards: This equipment meets the requirements Class: H. 

Assembly:

• 

It is important you assemble the product in a clean and uncluttered space.

• 

Remove all the parts from the carton and lay them out on the floor.

• 

Should you require any support regarding this product please call our customer 

services on 0844 800 0631 / 0344 800 0631. High Street TV, PO Box 724, 

Altrincham WA15 5BJ

Care and maintenance:

• 

This equipment should not be stored outdoors, in a garage or an outbuilding. Keep 

the equipment in a dry place with as little temperature variation as possible.

• 

We recommend placing a mat beneath the equipment to protect both the 

equipment and flooring.

• 

New Image mat ca

n be purchased at 

newimagefitness.co.uk

.

• 

The safety level of the equipment can be maintained only if it is regularly examined 

for damage and wear. This includes any ropes, pulleys, handles, nuts, bolts, moving 

parts, bushes, chains, wheels, bearings and connection.

• 

Bands may wear over time. If you have any concerns please contact customer 

support.

• 

Wipe down your FITT Gym after each use with a clean, damp cloth.  Do not use 

chemicals or detergents.

Class: H

Weight: 25Kgs

Dimensions: 1600mm x 430mm x 800mm

Model number: FG01

To dispose of product and packaging please recycle where facilities exist.  

Check with your Local Authority or retailer for recycling advice in your country.

14

Summary of Contents for FG01

















Reviews: