New Holland Workmaster 25 Tier 4B, Operator'S Manual

Page: 54 / 198

3 - CONTROLS AND INSTRUMENTS
Transmission shuttle shift lever
WARNING
Equipment rolling hazard!
Firmly apply the handbrake and place the shuttle lever in the park brake position. Stop the engine
before leaving the machine. The transmission will not prevent the machine from rolling when the
engine is shut off.
Failure to comply could result in death or serious injury.
W0378A
The transmission shuttle shift lever (1) is located on the
left-hand side of the dash panel. The shuttle shift lever is
used to engage the transmission into forward or reverse
mode while depressing the clutch pedal. Move the lever
forward for forward travel and rearward for reverse travel.
NOTICE: Do not attempt to operate the shuttle lever while
the tractor is moving, it may cause damage to the syn-
chromesh gear. The clutch pedal must be depressed and
tractor motion stopped to operate the shuttle lever.
NOTE: The shuttle shift lever is only found on mechanical
transmission tractors.
NOTE: The shuttle lever must be in the neutral (middle)
position to activate the safety start system, which allows
the engine to start.
93099335
1
3-8