4 - OPERATING INSTRUCTIONS
Rear PTO operation without operator present
WARNING
Entanglement hazard!
Before operating stationary Power Take-Off (PTO) equipment, do the following: apply the parking
brake, place all controls in the neutral position, and block all four wheels.
Failure to comply could result in death or serious injury.
W0336A
NOTICE:
The engine will shut off in approximately two seconds if the operator leaves the seat without the main trans-
missions shift lever/shuttle shift lever in the neutral position, HST pedals not in the neutral position or the Mid PTO
lever not in the "OFF" position.
NOTE:
The Mid PTO cannot be operated without an operator present in the seat.
To operate the rear PTO without the operator in the seat the following operations must be performed:
• Main transmission shift/Shuttle shift lever in NEUTRAL position.
• Park brake engaged.
• Mid PTO in "OFF" position (if equipped).
• Rear PTO in "ON" position.
The alarm will sound when the following conditions are present:
• Rear PTO is engaged.
• Operator not in the seat.
• Park brake disengaged.
4-3
Summary of Contents for Workmaster 25 Tier 4B
