New Holland Workmaster 25 Tier 4B, Operator'S Manual

Page: 7 / 198

1 - GENERAL INFORMATION
1 - GENERAL INFORMATION ###_1_###
Note to the Owner
This manual contains information concerning the adjustment and maintenance of your new equipment. You have
purchased a dependable machine, but only by proper care and operation can you expect to receive the performance
and long service built into this equipment. Please have all operators read this manual carefully and keep it available
for ready reference.
Your NEW HOLLAND dealer will instruct you in the general operation of your new equipment. (Refer to the 'Delivery
Report' at the back of this manual.) Your dealer's staff of factory-trained service technicians will be glad to answer
any questions that may arise regarding the operation of your machine. New Holland Top Service is also available.
Call 1-866-NEWHLND (1-866-639-4563) or email na.topservice@cnh.com.
Your NEW HOLLAND dealer carries a complete line of genuine NEW HOLLAND service parts. These parts are
manufactured and carefully inspected to insure high quality and accurate fitting of any necessary replacement parts.
Be prepared to give your dealer the model and product identification number of your new equipment when ordering
parts. Locate these numbers now and record them below. Refer to the 'General Information' section of this manual
for the location of the model and product identification numbers of your machine.
PLEASE RECORD THE FOLLOWING INFORMATION
Model
Product Identification Number (PIN)
Date Purchased
Engine Model
Engine (PIN)
This is the safety alert symbol. It is used with and without signal words to alert you to potential
personal injury hazards. Obey all safety messages that follow this symbol to avoid possible
death or injury.
WARNING
Illustrations in this manual may show protective shielding open or removed to better illustrate a par-
ticular feature or adjustment.
Replace all shields before operating the machine.
Failure to comply could result in death or serious injury.
W0012A
ATTENTION: The engine and fuel system on your machine is designed and built to government emission standards.
Tampering by dealer, customers, operators, and end users is strictly prohibited by law. Failure to comply could result
in government fines, rework charges, invalid warranty, legal action, and possible confiscation of the machine until
rework to original condition is completed. Engine service and/or repairs must be done by a certified technician only!
Improvements
CNH INDUSTRIAL AMERICA LLC is continually striving to improve its products. We reserve the right to make im-
provements or changes when it becomes practical and possible to do so, without incurring any obligation to make
changes or additions to the equipment sold previously.
1-1