9
12 x 12 Round Post Louvered Pergola
131 in [332.7 cm]
131
in
[332.
7
cm]
185
5/8
in [471.4
cm]
From
edge
of
br
ack
et
(bot
tom
of
plate)
to
edge
of
br
ack
et.
Measure and mark out the location of the ground brackets plate
using string or chalk line. Diagonal distances must be equal to ensure
a square installation. Adjust string lines accordingly.
The inside corner of the string lines will be the corner of the plate.
Mark out the location of brackets using the base plate of the bracket
accordingly.
Depending on where the pergola will be installed, you may need
sleeve anchors if installing on a concrete surface, or lag screws
if installing on a wood platform (deck). Refer to page 6 for hardware
recommendations.
Mounting hardware is not included in the Round Post Bracket Kit.
Following the instructions supplied with the hardware, proceed
to install four fasteners into each the base plate of the bracket.
Please Note:
Concrete patios generally have sloped surface for water run-off.
If this is the case, the ground bracket may be at an angle. This can
be corrected for level using galvanized steel washers (not provided),
acting as shims underneath the ground bracket
VERY IMPORTANT OR PERGOLA BEAMS AND RAFTERS WILL NOT BE LEVEL.
5
OPTIONAL STEP
6
7
5
www.newenglandarbors.com
www.newenglandarbors.co.uk
8
Washer(s) as required.
7
8
8
Sleeve
Anchor
Lag Screw