Pergola Additional Materials List
Hardware
(in plastic bag)
All Screws Included with this Kit are Self-Auguring.
A.
Tube of Vinyl Weld Glue (2) - 20000
B.
5/8” (16mm) Stainless Steel Screws (72) - 20016
(to lock Louver Assembly to Steel Holder
Brackets )
C.
5/8” (16mm) Stainless Steel Screws (16) - 20016
(to lock the Round Post Adapter to the Posts)
D.
1 1/2” (38mm) Stainless Steel Screws (40) - 20005 -
(for Beam and Rafter Joiners)
E.
2 1/2“ (64mm) Stainless Steel Screws (2) - 20009-1 -
(to fasten Turn Bar Holder to post)
F.
2 1/2“ (64mm) Stainless Steel Screws (16) - 20006 -
(to lock
Columns
to
Wood
Posts)
G.
4” (102mm) Stainless Steel Screws (
72
) - 20006 -
(to lock Rafters
,
Beams
, & Columns
)
H.
9” (229mm) Stainless Steel Bolt Assembly with Nuts and Washers (4) - 20035 -
(to lock
the Column Tops and Beams together)
Extra Materials You will Need
(Purchase separately from www.newenglandarbors.com or retailer of our products)
If Mounting Pergola on Concrete or Wood Deck
I. 4x4x8 (10x10x250cm) Pressure-Treated Wood Posts, cut down to 94“ (239cm) (4)
(purchase
at local building center)
*IMPORTANT NOTE*
Most commercially available pressure treated 4x4 posts are milled to 3 1/2” x 3 1/2“ (8.9x8.9cm).
The wood posts cannot exceed 3 5/8” x 3 5/8“ (9.2x9.2cm) square in order to fit inside the round post inner channels.
J. Round Post Bracket Kit
(purchase from www.newenglandarbors.com or a retailer of our products)
Included in the Round Post Bracket Kit: - Galvanized Steel Brackets (4)
- #8 x 1 1/2” (4x38mm) Wood Screws (4)
- 5/16 x 3“ (8x76.2mm) Lag Screws (12)
Refer to the Bracket Kit instructions for hardware requirements, as they pertain to your application:
If mounting pergola onto an existing concrete surface:
•
3/8” x 3“ (6x76.2mm) Concrete Sleeve Anchors - (16)
•
5/16” (8mm) Concrete drill bit. Minimum 3“ (76mm) long (1)
If mounting pergola onto a wooden/composite deck:
•
5/16” x ?“ (8x?mm) Lag Bolts (16) (Bolt length depends on thickness of deck)
•
5/16” (8mm) Washers (32)
•
9/64” (3.5mm) Wood drill bit. Minimum 3“ (76mm) long (1)
If mounting pergola onto a wooden/composite deck with AN ACCESSIBLE UNDERSIDE:
•
5/16” x ?“ (8x?mm) Bolts and Nylon-Insert Lock Nuts (16) (Bolt length depends on blocking material)
•
5/16” (8mm) Washers (32)
•
5/16” (8mm) Wood drill bit. Minimum 3“ (76mm) long (1)
•
2x10” (5.1x25cm) Wood Blocks (4) to be secured between the deck
joists, to provide adequate support for the pergola posts.
If Mounting Pergola in Ground
K. 4x4x12 (10x10x365cm) Pressure-Treated Wood Posts (4)
(purchase at local
building center)
L. Concrete Ready Mix (4)
(purchase at local building center)
Rafter/ Beam Support (Required)
M. 2x6x12 (4x15x365cm) Pressure-Treated Boards for Beams and Rafters (10)
(purchase at local building center)
Not to Scale
6
12 x 12 Round Post Louvered Pergola
D
E F
G
C
B
H
A
L
CONCRETE - Ready Mix
Purchase Separately
Purchase Separately
J
M
I
K
Purchase
Separately
Purchase
Separately
Purchase
Separately
www.newenglandarbors.com
www.newenglandarbors.co.uk