29
Settings
Select the unit of measurement for the logging interval
rate with the
🔺
/▼ button. Then press the
▶
button to
confirm the selection. The settable unit is “00ms”, “sec”,
“0sec”, “min”, “0min” or “hour”.
(E-2) Logging on/off
To start (or end) data logging, select “On/Off” on the Log
Setup screen. Press the
▶
button to confirm the selection.
Select “ON” (or “OFF”) with the
🔺
/▼ button, and then
press the
▶
button to confirm the selection.
When “ON” is selected, the “LOG” icon will be displayed
on the right side, and then the gas concentrations are
logged (the measured temperatures and humidities are
also logged and they are only an estimate and no
guarantee is provided).
(E-3) Log deletion
To delete the logs, select “Delete Logs” on the Log Setup
screen. Press the
▶
button to confirm the selection.
Select “YES” with the
🔺
/▼ button, and then press the
▶
button to confirm the selection. All the logs will be deleted.
Logging is in progress
It is possible to view the log memory
usage (used %), number of logs, and
logging time left (the time remaining
before the logging stops) from the
device information display (page 22).
NOTE
