NTI VEEMUX DVI VIDEO MATRIX SWITCH
40
User Config
From the Administration menu, select the User Config to display a list of the users that have been configured on the VEEMUX.
-
To add a user, select “Add New User”.
-
To change the configuration of a user, select the Username, or “Edit”.
-
To delete a user, select “Delete” for that user.
Figure 22- Users page
Whether you add a user, or edit a user, the “Configure User” page will open. If this is a new user being added, enter a user
name, decide if the user should have administrative privileges or not, enable their access to the VEEMUX (or not), and assign a
password.
•
Usernames and passwords are case sensitive.
•
Usernames can be from 1 to 16 characters in length and can be alphabetical or numeric.
•
Passwords can be from 5 to 16 characters in length and can be alphabetical or numeric.
Note: A password must be entered for the user to be enabled, even if the “Enable” block is checked and the user is
saved without a valid password being entered.
Figure 23- User configuration page
After making any changes, be sure to click “Save”.
Summary of Contents for VEEMUX SM-nXm-DVI-LCD
Page 5: ...iv...
