NTI VEEMUX DVI VIDEO MATRIX SWITCH
6
3.If the VEEMUX will be controlled using RS232, then make a connection between the “RS232” port on the VEEMUX and a
serial port on a PC. A DB9M-to-RJ45F adapter and 5 foot CAT5 patch cable have been provided to help with this connection
if needed.
Figure 5- Connect RS232 control terminal to VEEMUX
3a. If the VEEMUX model is SM-4X4-DVI(A)-LCD, the switch has a USB Type B female port that can be used for RS232
connection to a PC. Connect a USB A-B cable (i.e. NTI P/N USB2-AB-xM-5T -available in 0.5,1,2,3 and 5 meter lengths)
between the “USB CONSOLE” port on the VEEMUX and any available USB Type A port on a PC. For more on using the USB
port on the SM-4X4-DVI(A)-LCD, see page 13.
Figure 6
- Connect RS232 using USB cable
RJ45
"<US B> "
RJ45
"<
USB>
"
FUSE T2A,250V
AC INPUT 100-240VAC,30W
INPUT 1
INPUT 6
INPUT 7
INPUT 8
INPUT 5
INPUT 2
INPUT 3
INPUT 4
RS232
ETHERNET
(DCE)
OUTPUT 1
OUTPUT 2
OUTPUT 3
OUTPUT 4
OUTPUT 5
OUTPUT 6
OUTPUT 7
OUTPUT 8
REAR VIEW OF SM-8X8-DVI-LCD
VGA
Multi-Scan
Monitor
Terminal (PC)
DB9M to RJ45F
Adapter (supplied)
CAT5
Patch Cable
(supplied)
Summary of Contents for VEEMUX SM-nXm-DVI-LCD
Page 5: ...iv...
