Network Appliance C1200 NetCache, Service Manual, Page: 26 / 128

16 Connecting to an ASCII terminal console
Connecting to an
ASCII terminal
console To connect an ASCII terminal console to the appliance, complete the following
steps.
Step Action
1 Set the following communications parameters to the same values for
both the appliance and ASCII terminal.
Parameter Setting
Baud 9600
Data bit 8
Parity None
Stop bits 1
Flow control None
Note
See your terminal documentation for information about changing
your ASCII console terminal settings.
2 Connect the RJ-45 end of the cable to the console port on the
appliance and the DB-9 of the cable to the ASCII terminal.
3 Go to Chapter 4, “ Powering on the NetCache appliance ,” on page 17.