26
1
2
My-Netti.com
Model:
Netti 4U CE PLUS / CES PLUS
Language:
English
Version:
2022-03
If the brake does not brake properly:
To adjust the wire on one or both sides, adjust the
foot screw 2 – 4 rounds out. Then recheck the brakes.
If the wire is too loose:
• Adjust the foot screw all the way in.
• Tighten the wire by loosening the wire clamp
before pulling the wire further through it.
• Tighten the wire clamp, and adjust the foot
screw out again.
1 pc 10mm open-end spanner.
To ensure the correct functions of
the wire, these must never be taut.
Operating and applying the brake
The wheelbase with drum brake is fitted with hand
operated hub brakes to allow regulation of speed
on hills and whilst travelling along. These are located
on the push handles.
• To apply the brakes, pull the brake levers (
1
)
evenly and smoothly towards handle and bring
the wheel-base to a stop.
• For locking the brake in parking position, press
the lever (
1
) against the push handle and push
the lever (
2
) away from you wedging the park
brake lever. Make sure both parking brakes
are locked.
• The brake will be released when you press
the lever (
1
) against the push handle again.
It is locked with a spring and this will in this
way be released.
Do not leave the user alone in
the wheelchair without putting
the parking-brake in function.
