23
Model:
Netti 4U CE PLUS / CES PLUS
Language:
English
Version:
2022-03
My-Netti.com
Adjusting the head support sideways:
• The head support adapter can be
moved both to the right and left,
giving the possibility to accommodate
special needs for head support.
• Untighten the four screws holding
the adapter together.
• Move the adapter to the required
position and fix the adapter by
tightening the screws diagonally.
Remember to release the levers when
adjusting the head support.
If the head support stand does not fit
the bracket perfectly, the bracket is
probably fixed too tight or unevenly.
After fitting the head support fix it
properly by tightening the little set
screw in the centre on top of the head
support bracket using an Allen-key.
If the head support seems to short in
height, it can be turned 180° by releasing
the adjustment wheel at the rear of the
horizontal bar (B).
The head support bracket is fixed by tightening
the four screws two by two diagonally so the
bracket is fixed with the same strength divided
on the four screws.
Adjusting the head support in depth:
• Release the locking lever on top of
the vertical bar (
A
).
• Adjust the head support and fix it in
required position.
Adjusting the head support in height:
• Release the locking lever on the head
support adapter (
C
).
• Adjust the head support and fix it in
required position.
Adjusting the head support in angle:
• Release the adjustment wheel at the
rear of the horizontal bar (
B
).
• Adjust the head support and fix it in
required position.
