18
My-Netti.com
Model:
Netti 4U CE PLUS / CES PLUS
Language:
English
Version:
2022-03
6.7
SEAT DEPTH ADJUSTMENT
• If the seat depth can only be adjusted at the rear,
loosen the locking bolt in the plastic bracket.
• Find the required position for the locking head in
the plastic bracket, and remove the plastic plug
from this hole.
• Lock the backrest by pushing the lockingbolt
through the plastic bracket and the gas spring
locking head.
• After changing the hole position in the plastic
bracket, the hole position in the backrest hinge
must be changed into the parallel position.
Check that the hole in the backrest hinge
and the plastic bracket are mounted into
the same hole position.
6 mm Allen-key.
6.8
ANTI-TIPS
The anti-tips should be mounted according to the
mounting description which is enclosed with the
chair upon arrival.
USE OF THE ANTI-TIP
• Pull the anti-tip out.
• Turn it up or down 180°.
• Lock it in position.
ADJUSTING THE HEIGHT OF THE ANTI-TIPS
The anti-tip can be adjusted in two fixed positions.
The short position is for 12” & 16” main wheels and
24” in upper position. The long position is for 24”
main wheels in lower position.
• Unfix the screw in the adjustable extension piece
as shown in picture below.
• This extension piece has two holes. Place it in the
required position and tighten the screw.
5 mm Allen-key.
The anti-tip should always be used
for the safety of the user.
