Netti 4U CE Plus, User Manual

Page: 21 / 48

21
Model:
Netti 4U CE PLUS / CES PLUS
Language: English Version: 2022-03 My-Netti.com
Adjusting the angle of the footplate
The foot plates angle can be adjusted.
• Untighten the screw ( B ) and adjust
the foot plate to the required angle.
Fix the screw properly.
5 mm Allen-key.
Locking and releasing the foot plates
• The foot plates come with a locking
mechanism which makes the plates
stronger.
• To lock the foot plates pull the plastic
lock on the right foot plate and place
the lock over the bolt on the left
foot plate.
• To release the foot plate pull the
plastic lock and lift the right foot
plate up.
For outdoor use, there should be
a clearance of 40 – 50 mm between
the foot plate and the ground.
While making the adjustment there
must be no load on the foot plates.
REMOVING THE LEG SUPPORT
• Pull the plastic lock on the foot plate rearwards,
so that the pin is released, and the foot plate
can be folded up.
• Release the leg support by pulling it slightly
straight up.
• Swing the leg support outwards.
• Lift and remove the leg support.
Never stand on the foot plates!
Never lift the wheelchair by the
leg supports.