27
Model:
Netti 4U CE PLUS / CES PLUS
Language:
English
Version:
2022-03
My-Netti.com
7.2
BACKREST ANGLE
The backrest angle is regulated using the release
handle mounted on the push bar. The angle can
be regulated from 90° forward to 45° backwards.
To ensure correct function of the wires,
these must never be taut.
The seat and backrest angle must not
be adjusted without using the anti-tips.
The release handles has each one
of the following label:
Tilt
Recline
Risk for tipping.
Check the position of anti-tip.
When chair back extension is mounted, the
tipping risk increases. If necessary it should
be improved by moving the main wheels
further back. Always use anti-tippers when
recline and tilt functions are being activated.
7.1 SEAT ANGLE
The seat angle is regulated using the release
handle mounted on the push bar.
The seat unit can be tilted from –5° to +20°.
If you adjust the seat tilt below 0°, there is an
increased risk of slipping forward out of the
chair. Alu Rehab recommends the use of a
hip belt to prevent falling out of the chair.
7. SEAT ANGLE / TILT AND BACK ANGLE / RECLINE
