Installation /removal of the connector for workshop vacuum
tubes
The connector for workshop vacuum tubes - or adapter - allows the
user to maintain a clean working environment, by allowing the
connection of the power tool to a workshop vacuum.
The adapter must be connected to a vacuum, which will be resistant to
dust generated during the processing of different materials.
The connector for dust extraction (15) should be put onto the sawdust
exhaust channel (6). When installing - the detents, which are placed in
the connector, should be inserted into the perforations made in the
channel.
The adapter must be turned in the clockwise direction - as seen from
the back of the unit
– securing the connector in place. After the
installation of the connector the vacuum cleaner suction pipe may be
plugged in. which is resistant to dust created from different materials.
Make sure that the vacuum cleaner is turned on to ensure that dust
and shavings produced during power operation will be absorbed.
To remove the connector (15), first unplug the vacuum cleaner tube
and turn the
connector counterclockwise (viewed from the rear of the tool) and
remove it
from the exhaust channel (6).
