CLEANING & STORAGE
Correct and regular cleaning will improve the safety and extend the
lifespan of the device.
Warning!
Turn the device until it cools down before off,
disconnect it from the mains and wait cleaning or
maintenance to avoid burns.
Protective features, ventilation openings and the motor
housing should always be free from dust and other contamination.
Wipe the device with a damp cloth or blow it down with low-pressure
compressed air.
It is recommended that you clean the device immediately after every
use.
Protect the interior of the device from water penetration.
Do not immerse the device or parts of it in water or other prisms.
The cutting parts must be sharp and kept clean. Properly maintained
cutting elements that are properly sharpened, adhere better to the
surface and provide better cutting control.
Attention
!
Do not use any chemical, alkaline, abrasive or disinfecting
substances to clean the device, as they can damage its
surfaces.
