Copyright © NetPing east Co., Ltd E-mail:
Phone:+886-2-23121582
[ENG] 6.7. [DKSF 48.4 IU] I Want to Configure Sending Notifications When a Sensor Status Is Changed. How to
Do This?
Sending notifications when a status of a smoke sensor is changed is configured at the page «
» of a device web interface:
SMOKE
When clicking the button «
» a menu of settings appears for sending notifications of the next types: Log, Syslog, e-mail, SMS (in a device with
Configure
an embedded GSM modem) and SNMP Trap:
where:
Alert – is a checkbox, when checked a device will send notifications if a smoke sensor has been switched
into a status «Alert».
: checkbox is
On default
not checked
Normal State – is a checkbox, when checked a device will send notifications if a smoke sensor has been switched into a
«normal state».
:
On default
checkbox is not checked
Отказ, Отключение – is a checkbox, if checked a device will send notifications if a connection is lost or when a smoke sensor is de-energized
. On
: checkbox is not checked
default
After setting all necessary parameters, click the button
.
«Apply changes»