manualshive.com logo in svg

Netopia R7100, User Reference Manual

The Netopia R7100 User Reference Manual is a comprehensive guide for configuring and utilizing the powerful features of this advanced networking device. Available for free download from our website, this manual provides step-by-step instructions and troubleshooting tips to ensure optimal performance.

Share
Download
background image

IP Setup and Network Address Translation   9-15

Press Escape when you are finished configuring expor ted ser vices. You are returned to the IP Setup 
screen.

■

If you select 

Filter Sets

 you will be taken directly to the screen for configuring IP packet filters. For 

information see 

“About filters and filter sets,” beginning on page 13-4

.

IP subnets

The IP Subnets screen allows you to configure up to eight Ethernet IP subnets on unlimited-user models, one 
“primar y” subnet and up to seven secondar y subnets, by entering IP address/subnet mask pairs:

                                  IP Setup

         Ethernet IP Address:               192.128.117.162
         Ethernet Subnet Mask:              255.255.255.0
         Define Additional Subnets...

         Default IP Gateway:                192.128.117.163

         Primary Domain Name Server:        0.0.0.0
         Secondary Domain Name Server:      0.0.0.0
         Domain Name:

         Receive RIP:                       Both
         Transmit RIP:                      v2 (multicast)
         Static Routes...

         Address Serving Setup...
         Exported Services...
         Filter Sets...

                              IP Subnets

               IP Address          Subnet Mask
               ----------------    ---------------
          #1:  192.128.117.162     255.255.255.0

          #2:  0.0.0.0             0.0.0.0

          #3:

          #4:

          #5:

          #6:

          #7:

          #8:

Summary of Contents for R7100



































































































































































































































































Reviews:

No comments

Related manuals for R7100

Raritan DOMINION SX - Quick Setup Manual preview
DOMINION SX -
Brand: Raritan Pages: 4
Javad TRIUMPH-3NR User Manual preview
TRIUMPH-3NR
Brand: Javad Pages: 35
PaloAlto Networks ION 1200 Series Hardware Reference Manual preview
ION 1200 Series
Brand: PaloAlto Networks Pages: 90
EnGenius ETR9360 Quick Start Manual preview
ETR9360
Brand: EnGenius Pages: 3
Kasda LinkSmart KW6515 User Manual preview
LinkSmart KW6515
Brand: Kasda Pages: 31
XtendLan NVR-xUD User Manual preview
NVR-xUD
Brand: XtendLan Pages: 228
NKE BOX Wi-Fi User Manual And Installation Manual preview
BOX Wi-Fi
Brand: NKE Pages: 15
DCB BROADCAST POLLING FRAD BPF-14 BU Manual preview
BROADCAST POLLING FRAD BPF-14 BU
Brand: DCB Pages: 28
Paradyne iMarc SLV 9820-2M Installation Instructions Manual preview
iMarc SLV 9820-2M
Brand: Paradyne Pages: 24
LaView LV-KN series Quick Start Manual preview
LV-KN series
Brand: LaView Pages: 2
NetComm Dynalink MyZone 3G24W Remote Administration Setup preview
Dynalink MyZone 3G24W
Brand: NetComm Pages: 5
Allied Telesis CentreCOM AT-3716XL Quick Install Manual preview
CentreCOM AT-3716XL
Brand: Allied Telesis Pages: 2
MCT MPU100ZW User Manual preview
MPU100ZW
Brand: MCT Pages: 12
Extreme Networks ExtremeCloud Appliance E1120 User Manual preview
ExtremeCloud Appliance E1120
Brand: Extreme Networks Pages: 219
Netequalizer NE3000-10 Quick Start Manual preview
NE3000-10
Brand: Netequalizer Pages: 14
Dinstar UC8000 IPPBX User Manual preview
UC8000 IPPBX
Brand: Dinstar Pages: 103
Cabletron Systems TRXMIM-24A User Manual preview
TRXMIM-24A
Brand: Cabletron Systems Pages: 56
IBA ibaBM-FOX-i-3o-D Manual preview
ibaBM-FOX-i-3o-D
Brand: IBA Pages: 13

Brands by name

Popular brands

Load more brands