Netopia R7100 User Reference Manual Download Page 139

Page: 139 / 258

Monitoring Tools 12-11

The IP Address Lease Management screen appears.

This screen has three options:

■

Reset All Leases

: Resets all current IP addresses leased through DHCP without waiting for the default

one–hour lease period to elapse

■

Release

BootP Leases

: Releases any BootP leases that may be in place, and which may no longer be

required.

■

Reclaim Declined Addresses

: Reclaims ser ved leases that have been declined; for example by devices

that may no longer be on the network.

IP Address Lease Management

Reset All Leases

Release BootP Leases

Reclaim Declined Addresses

Hit RETURN/ENTER, you will return to the previous screen.

Summary of Contents for R7100



































































































































































































































































Search results

Summary of Contents for R7100

Reviews:

Related manuals for R7100

Brands by name

Popular brands

Netopia R7100, User Reference Manual

Search results

Summary of Contents for R7100

Reviews:

Related manuals for R7100

Brands by name

Popular brands