manualshive.com logo in svg

Netopia R7100, User Reference Manual

The Netopia R7100 User Reference Manual is a comprehensive guide for configuring and utilizing the powerful features of this advanced networking device. Available for free download from our website, this manual provides step-by-step instructions and troubleshooting tips to ensure optimal performance.

Share
Download
background image

AppleTalk Setup   11-7

EtherTalk Phase II por t is visible to other AppleTalk nodes. The default zone is also where new AppleTalk 
nodes will appear. If you do not set a default zone, the first zone you create will be the default zone.

■

You can also set the range of EtherTalk Phase II network numbers. Select 

Net Low

 and enter the lower limit 

of the network number range. Select 

Net High

 and enter the upper limit of the range.

■

Select the 

Seeding

 pop-up menu and choose the seeding method for the Netopia R7100 to use. (See 

“Routers and seeding” on page 11-3

).

You have finished configuring EtherTalk Phase II.

LocalTalk setup 

Note:

For instructions on making the physical connections for LocalTalk, see 

“Connecting to a LocalTalk 

network” on page 4-6

. 

In the AppleTalk Setup screen, select 

LocalTalk Setup

 and press Return. The LocalTalk Setup screen appears.

■

If you are using LocalTalk with the Netopia R7100, select 

LocalTalk Enabled

 and make sure LocalTalk is 

set to 

On,

 which is the default.

Note:

Since the LocalTalk connector attaches to the Auxiliar y por t on the router, that por t will no longer be 

available for a third external modem.

■

Select 

LocalTalk Zone Name

 and enter a new or existing zone name.

Note:

Your LocalTalk network may already have a zone and network number in place. For the Netopia 

R7100’s LocalTalk por t to be par t of your LocalTalk network, it must have a network number and zone 
name that matches the values in use on the LocalTalk network.

If another router is already present on the LocalTalk network that you will be connecting to the Netopia 
R7100, use the zone name and network number used by that router for that LocalTalk network. Other wise, 
your LocalTalk network may experience routing conflicts.

                                 LocalTalk Setup

         LocalTalk Enabled:                 On

         LocalTalk Zone Name:               Unnamed

         LocalTalk Net Number:              33126

         Seeding...                         Soft-Seeding

Use this screen to set up the LocalTalk Port Routing attributes.

Summary of Contents for R7100



































































































































































































































































Reviews:

No comments

Related manuals for R7100

Mafell LO 65 Ec Translation Of The Original Operating Instructions preview
LO 65 Ec
Brand: Mafell Pages: 162
Qualys GUARD Quick Start Manual preview
GUARD
Brand: Qualys Pages: 2
Ubiquiti airFiber AF-5X User Manual preview
airFiber AF-5X
Brand: Ubiquiti Pages: 50
Supermicro SC836 X9 User Manual preview
SC836 X9
Brand: Supermicro Pages: 24
WolfPack 18x18 Card Cage User Manual preview
18x18 Card Cage
Brand: WolfPack Pages: 31
Cisco MERAKI MX450 Installation Manual preview
MX450
Brand: Cisco MERAKI Pages: 4
Cabletron Systems SmartSwitch 8-slot User'S Reference Manual preview
SmartSwitch 8-slot
Brand: Cabletron Systems Pages: 150
AMX NXF Dimensional Drawing preview
NXF
Brand: AMX Pages: 1
Tripp Lite N201-003-WH Specifications preview
N201-003-WH
Brand: Tripp Lite Pages: 2
Flexwatch FW3870 User Manual preview
FW3870
Brand: Flexwatch Pages: 13
Matrix Switch Corporation MSC-XD88S Product Manual preview
MSC-XD88S
Brand: Matrix Switch Corporation Pages: 60
TRENDnet TEW-WLC100P User Manual preview
TEW-WLC100P
Brand: TRENDnet Pages: 57
Hypercom IN-tact 1201 Brochure & Specs preview
IN-tact 1201
Brand: Hypercom Pages: 2
Synology DiskStation Series Upgrade Installation Instructions preview
DiskStation Series
Brand: Synology Pages: 6
National Instruments NI 653x User Manual preview
NI 653x
Brand: National Instruments Pages: 147
BinTec BIANCA/BRICK XS Quick Install Manual preview
BIANCA/BRICK XS
Brand: BinTec Pages: 2
Enterasys Matrix 6H303-48 Hardware Installation Manual preview
Matrix 6H303-48
Brand: Enterasys Pages: 90
Paradyne Application Module 9109 OCU-DP Installation Instructions Manual preview
Application Module 9109 OCU-DP
Brand: Paradyne Pages: 8

Brands by name

Popular brands

Load more brands