Netopia R2121, User Reference Manual

Page: 211 / 280

Utilities and Diagnostics 15-7
Disconnect Telnet Console Session
If you want to close your Telnet Console session, select Disconnect Telnet Console Session and press Return.
A dialog box appears asking you to cancel or continue your selection.
If you select Continue , you will immediately terminate your session.
Factory defaults
You can reset the Netopia R2121 to its factor y default settings. Select the Revert to Factory Defaults item in
the Statistics & Diagnostics screen and press Return. Select CONTINUE in the dialog box and press Return.
The Netopia R2121 will reboot and its settings will return to the factor y defaults, deleting your configurations.
In an emergency, you can also use the Reset Switch to return the router to its factor y default settings. Call
Netopia Tech Suppor t for instructions on using the Reset Switch.
Note: Reset to factor y defaults with caution. You will need to reconfigure all your settings in the router.
Transferring configuration and firmware files with TFTP
Trivial File Transfer Protocol (TFTP) is a method of transferring data over an IP network. TFTP is a client-ser ver
application, with the Router as the client. To use the Router as a TFTP client, a TFTP ser ver must be available.
Netopia, Inc. has a public access TFTP ser ver on the Internet where you can obtain the latest firmware versions.
To use TFTP, select Trivial File Transfer Protocol (TFTP) in the Statistics & Diagnostics screen and press
Return to go to the Trivial File Transfer Protocol (TFTP) screen.
Utilities & Diagnostics
+------------------------------------------------------+
+------------------------------------------------------+
| |
| Are you sure you want to close this Console Session? |
| |
| CANCEL CONTINUE |
| |
| |
+------------------------------------------------------+
X-Modem File Transfer...
Revert to Factory Defaults...
Restart System...