manualshive.com logo in svg

Netopia 4752, Administration Manual

The Casio 4752 is a versatile timepiece that combines style with functionality. To understand its full potential, make sure to download the comprehensive Operation Manual. This manual is available for free download from our website, making it easy to maximize the use of your Casio 4752.

Share
Download
background image

Virtual Private Networks (VPNs)   12-21

When you define a Connection Profile as using ATMP by selecting ATMP as the datalink encapsulation method, 
and then select 

Data Link Options

, the ATMP Tunnel Options screen appears.

Note:

An ATMP tunnel cannot be assigned a dynamic IP address by the remote ser ver, as in a PPP connection. 

When you define an ATMP tunnel profile, the Local WAN IP Address, assigned in the IP Profile Parameters 
screen, must be the true IP address, not 0.0.0.0, if NAT is enabled.

Profiles using ATMP do not offer a Telco Options screen.

■

ATMP Partner IP Address

 specifies the address of the other end of the tunnel. When unspecified, the 

                             Add Connection Profile

         Profile Name:                      Profile 1
         Profile Enabled:                 +-------------+
                                          +-------------+
         Data Link Encapsulation...       | PPP         |
         Data Link Options...             | Frame Relay |
                                          | ATM FUNI    |
                                          | ATMP        |
         IP Profile Parameters...         | PPTP        |
                                          +-------------+

         ADD PROFILE NOW                    CANCEL

                             ATMP Tunnel Options

         ATMP Partner IP Address:           173.167.8.134
         Tunnel Via Gateway:                0.0.0.0

         Network Name:                      sam.net
         Password:                          ****

         Data Encryption...                 DES
         Key String:

         Initiate Connections:              Yes
         On Demand:                         Yes

         Idle Timeout (seconds):            300

Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx).
In this Screen you will configure the GRE/ATMP specific connection params.

Summary of Contents for 4752





























































































































































































































































































Reviews:

No comments

Related manuals for 4752

3Com OfficeConnect 1600 Datasheet preview
OfficeConnect 1600
Brand: 3Com Pages: 8
3Com 3CRWEASY96A Quick Start Manual preview
3CRWEASY96A
Brand: 3Com Pages: 8
Cabletron Systems Netlink FRX4000 Installation And Setup Manual preview
Netlink FRX4000
Brand: Cabletron Systems Pages: 8
Cabletron Systems 9C300-1 Upgrade Instructions preview
9C300-1
Brand: Cabletron Systems Pages: 4
Cabletron Systems MMAC-Plus 9F106-02 Reference Manual preview
MMAC-Plus 9F106-02
Brand: Cabletron Systems Pages: 7
H3C H3C S7500E-X Command Reference Manual preview
H3C S7500E-X
Brand: H3C Pages: 16
H3C SR6600 SPE-FWM Configuration Manual preview
SR6600 SPE-FWM
Brand: H3C Pages: 24
IBM 8677 - BladeCenter Rack-mountable - Power... Planning And Installation Manual preview
8677 - BladeCenter Rack-mountable - Power...
Brand: IBM Pages: 126
LaCie 301160U - 1TB Ethernet Disk RAID Network Attached... Quick Install Manual preview
301160U - 1TB Ethernet Disk RAID Network Attached...
Brand: LaCie Pages: 5
Macsense MIH-108 User Manual preview
MIH-108
Brand: Macsense Pages: 39
QNAP Turbo NAS TVS-71 Series Hardware User Manual preview
Turbo NAS TVS-71 Series
Brand: QNAP Pages: 51
Ubiquiti UniFi WiFi BaseStation XG Quick Start Manual preview
UniFi WiFi BaseStation XG
Brand: Ubiquiti Pages: 19
CG Emotron OSTO 100 Instruction Manual preview
Emotron OSTO 100
Brand: CG Pages: 112
Vacron VDH-NK300 Hardware Manual preview
VDH-NK300
Brand: Vacron Pages: 16
Broadband Products D-Link DSL-2640U Quick Installation Manual preview
D-Link DSL-2640U
Brand: Broadband Products Pages: 12
TP-Link Archer C7 How To Set Up preview
Archer C7
Brand: TP-Link Pages: 4
CAME 848EA-0120 Setup And User'S Manual preview
848EA-0120
Brand: CAME Pages: 32
LaView LV-KN series Quick Start Manual preview
LV-KN series
Brand: LaView Pages: 2

Brands by name

Popular brands

Load more brands