Netopia 4752, Administration Manual

Page: 37 / 284

Console-Based Management 6-3
from the Star t menu.
■
If you connect a Macintosh computer, you can use the NCSA Telnet program supplied on the Netopia 4752
CD. You install NCSA Telnet by simply dragging the application from the CD to your hard disk.
Connecting a Console Cable to Your Device
You can per form all of the system configuration activities for your Netopia 4752 through a local serial console
connection using terminal emulation software, such as HyperTerminal provided with Windows 95, 98, 2000, or
NT on the PC, or ZTerm, included on the Netopia CD, for Macintosh computers.
The Netopia 4752 back panel has a connector labeled “Console” for attaching the Router to either a PC or
Macintosh computer via the serial por t on the computer. (On a Macintosh computer, the serial por t is called the
Modem por t or Printer por t.) This connection lets you use the computer to configure and monitor the Netopia
4752 via the console screens.
Netopia 4752 back panel
To connect the Netopia 4752 to your computer for serial console communication, use a console cable
appropriate to your platform:
■
A DB-9 connector end attaches to a PC.
■
A mini-DIN8 or a USB connector end attaches to a Macintosh computer depending on your computer’s
serial bus type. Since Macintosh computers have different serial bus connectors, you will need a
mini-DIN8- or USB-to-DB-9 adapter. These are available from a variety of third-par ty manufacturers.
■
A DB-9 end of the Console cable attaches to the Netopia 4752’s Console por t.
■
If you connect a PC with Microsoft Windows 95, 98, 2000 or NT, you can use the HyperTerminal application
bundled with the operating system.
■
If you connect a Macintosh computer, you can use the ZTerm terminal emulation program on the supplied
Netopia 4752 CD.
Console Power
10/100
Ethernet
DSL Telephone
Extensions
1 2 3 4 5 7 8 6
Console connection por t
DB-9 (male)