manualshive.com logo in svg

Netopia 4752, Administration Manual

The Casio 4752 is a versatile timepiece that combines style with functionality. To understand its full potential, make sure to download the comprehensive Operation Manual. This manual is available for free download from our website, making it easy to maximize the use of your Casio 4752.

Share
Download
background image

Utilities and Diagnostics   15-9

■

Select 

GET CONFIG FROM SERVER

 and press Return. You will see the following dialog box:

■

Select 

CANCEL

 to exit without downloading the file, or select 

CONTINUE

 to download the file. The system 

will reset at the end of the file transfer to put the new configuration into effect.

■

If you choose to download the configuration file, the 

TFTP Transfer State 

item

 

will change from 

Idle

 to 

Reading Config

. The 

TFTP Current Transfer Bytes

 item will reflect the number of bytes transferred.

Uploading configuration files

Using TFTP, you can send a file containing a snapshot of the router’s current configuration to a TFTP ser ver. The 
file can then be downloaded by a different Netopia 4752 unit to configure its parameters (see 

“Downloading 

configuration files” on page 15-8

). This is useful for configuring a number of routers with identical parameters or 

just for creating configuration backup files.

Uploading a file can also be useful for troubleshooting purposes. The uploaded configuration file can be tested 
on a different Netopia 4752 unit by Netopia or your network administrator.

To upload a configuration file, follow these steps:

1.

Select 

TFTP Server Name

 and enter the ser ver name or IP address of the TFTP ser ver you will use. The 

ser ver name or IP address is available from the site where the ser ver is located.

2.

Select 

Config File Name

 and enter a name for the file you will upload. The file will appear with the name you 

choose on the TFTP ser ver. You may need to enter a file path along with the file name (for example, 
Mypc/Netopia/myfile).

3.

Select 

SEND CONFIG TO SERVER

 and press Return. Netopia will begin to transfer the file.

4.

The 

TFTP Transfer State 

item

 

will change from 

Idle

 to 

Writing Config

. The 

TFTP Current Transfer Bytes

 

item will reflect the number of bytes transferred.

             +-----------------------------------------------------------+
             +-----------------------------------------------------------+
             |                                                           |
             |    Are you sure you want to read the configuration now?   |
             |    The device will reset when the transfer is complete.   |
             |                                                           |
             |        CANCEL                        CONTINUE             |
             |                                                           |
             +-----------------------------------------------------------+

Summary of Contents for 4752





























































































































































































































































































Reviews:

No comments

Related manuals for 4752

D-Link DXS-3610-54S Quick Installation Manual preview
DXS-3610-54S
Brand: D-Link Pages: 38
D-Link DWL-3150 Install Manual preview
DWL-3150
Brand: D-Link Pages: 8
D-Link DSS-8+ Manual preview
DSS-8+
Brand: D-Link Pages: 22
D-Link DSS-5+ Manual preview
DSS-5+
Brand: D-Link Pages: 20
D-Link DSS-24+ Technical Specifications preview
DSS-24+
Brand: D-Link Pages: 2
D-Link DSS-24+ Manual preview
DSS-24+
Brand: D-Link Pages: 16
D-Link DI-804V Quick Install Manual preview
DI-804V
Brand: D-Link Pages: 12
D-Link DIR-615 - Wireless N Router Installation Manual preview
DIR-615 - Wireless N Router
Brand: D-Link Pages: 13
D-Link Cobra DSL-5300 User Manual preview
Cobra DSL-5300
Brand: D-Link Pages: 124
D-Link Web Smart DES-1210-28P Selection Manual preview
Web Smart DES-1210-28P
Brand: D-Link Pages: 6
D-Link 2Voice + 4SW VoIP Router DVG-1402S User Manual preview
2Voice + 4SW VoIP Router DVG-1402S
Brand: D-Link Pages: 57
D-Link xStack Storage DSN-4000 Series Manual preview
xStack Storage DSN-4000 Series
Brand: D-Link Pages: 23
D-Link Express EtherNetwork DI-604 Brochure preview
Express EtherNetwork DI-604
Brand: D-Link Pages: 7
D-Link xStack Storage DSN-4000 Series Cli User'S Manual preview
xStack Storage DSN-4000 Series
Brand: D-Link Pages: 97
D-Link SharePort DIR-825 Quick Start Manual preview
SharePort DIR-825
Brand: D-Link Pages: 2
D-Link Amplifi DIR-645 Quick Installation Manual preview
Amplifi DIR-645
Brand: D-Link Pages: 28
3onedata IES615-2D Series Quick Installation Manual preview
IES615-2D Series
Brand: 3onedata Pages: 3
3One data 7212 User Manual preview
7212
Brand: 3One data Pages: 5

Brands by name

Popular brands

Load more brands