manualshive.com logo in svg

Netopia 4752, Administration Manual

The Casio 4752 is a versatile timepiece that combines style with functionality. To understand its full potential, make sure to download the comprehensive Operation Manual. This manual is available for free download from our website, making it easy to maximize the use of your Casio 4752.

Share
Download
background image

13-18  Administration Guide

Basic Firewall is suitable for a LAN containing only client hosts that want to access ser vers on the WAN, but not 
for a LAN containing ser vers providing ser vices to clients on the WAN. Basic Firewall’s general strategy is to 
explicitly for ward WAN-originated TCP and UDP traffic to por ts greater than 1023. Por ts lower than 1024 are the 
ser vice origination por ts for various Internet ser vices such as FTP, Telnet, and the World Wide Web (WWW).

A more complicated filter set would be required to provide WAN access to a LAN-based ser ver. See the next 
section, 

“Possible modifications,”

 for ways to allow remote hosts to use ser vices provided by ser vers on the 

LAN.

Possible modifications

You can modify the sample filter set Basic Firewall to allow incoming traffic using the examples below. These 
modifications are not intended to be combined. Each modification is to be the only one used with Basic Firewall.

The results of combining filter set modifications can be difficult to predict. It is recommended that you take 
special care if you are making more than one modification to the sample filter set.

Trusted host. 

To allow unlimited access by a trusted remote host with the IP address a.b.c.d (corresponding to 

a numbered IP address such as 163.176.8.243), inser t the following input filter ahead of the current input 
filter 1:

■

Enabled: Yes

■

For ward: Yes

■

Source IP Address: a.b.c.d

■

Source IP Address Mask: 255.255.255.255

■

Dest. IP Address: 0.0.0.0

■

Dest. IP Address Mask: 0.0.0.0

■

Protocol Type: 0

Trusted subnet. 

To allow unlimited access by a trusted remote subnet with subnet address a.b.c.d 

(corresponding to a numbered IP address such as 163.176.8.0) and subnet mask e.f.g.h (corresponding to a 
numbered IP mask such as 255.255.255.0), inser t the following input filter ahead of the current input filter 1:

■

Enabled: Yes

■

For ward: Yes

■

Source IP Address: a.b.c.d

■

Source IP Address Mask: e.f.g.h

■

Dest. IP Address: 0.0.0.0

■

Dest. IP Address Mask: 0.0.0.0

■

Protocol Type: 0

Summary of Contents for 4752





























































































































































































































































































Reviews:

No comments

Related manuals for 4752

D-Link GO-RT-N300 Quick Installation Manual preview
GO-RT-N300
Brand: D-Link Pages: 32
D-Link DXN-W224 Quick Start Manual preview
DXN-W224
Brand: D-Link Pages: 6
D-Link DSR-250N User Manual preview
DSR-250N
Brand: D-Link Pages: 221
D-Link ShareCenter Pro DNS-1200-05 Quick Installation Manual preview
ShareCenter Pro DNS-1200-05
Brand: D-Link Pages: 68
D-Link Express Ethernetwork DI-707P Quick Installation Manual preview
Express Ethernetwork DI-707P
Brand: D-Link Pages: 14
Panasonic BB-HGW700A - Network Camera Router Installation/Troubleshooting Manual preview
BB-HGW700A - Network Camera Router
Brand: Panasonic Pages: 10
3Com 3CR860-95 - OfficeConnect Secure Router Features And Benefits preview
3CR860-95 - OfficeConnect Secure Router
Brand: 3Com Pages: 2
3Com 3C905-TX Installation Manual preview
3C905-TX
Brand: 3Com Pages: 26
3Com 3C13886 - Router OC-3 ATM SML Flexible Interface... Installation Manual preview
3C13886 - Router OC-3 ATM SML Flexible Interface...
Brand: 3Com Pages: 171
3Com OfficeConnect WX2200 User Manual preview
OfficeConnect WX2200
Brand: 3Com Pages: 204
dixell XT120C Installing And Operating Insructions preview
XT120C
Brand: dixell Pages: 4
US Robotics USR8700 User Manual preview
USR8700
Brand: US Robotics Pages: 156
Eaton APS6-400 Series Installation And Operation Manual preview
APS6-400 Series
Brand: Eaton Pages: 114
National Instruments FieldPoint cFP-RTD-122 Operating Instructions Manual preview
FieldPoint cFP-RTD-122
Brand: National Instruments Pages: 15
Zalip CDG561 WE~P21 User Manual preview
CDG561 WE~P21
Brand: Zalip Pages: 77
Linksys EtherFast LNE100TX ver. 5 User Manual preview
EtherFast LNE100TX ver. 5
Brand: Linksys Pages: 42
UTStarcom UT-300R2U User Manual preview
UT-300R2U
Brand: UTStarcom Pages: 71
1&1 Homeserver+ Quick Start Manual preview
Homeserver+
Brand: 1&1 Pages: 32

Brands by name

Popular brands

Load more brands