NETGEAR WNR834, Setup Manual

Page: 21 / 42

Installing Your Router Manually (Advanced, Mac, and Linux Users) 17
Setting Up Your Router for Internet Access
When configuring your wireless router manually, you must log in to your wireless router to set it
up initially and to make any changes to your wireless router’s settings later.
To access the router using its login name and password:
1.
Type
http://www.routerlogin.net
in the address field of your browser, then click
Enter
.
A login window similar to the one shown in Figure 11 will display.
2.
When prompted, enter
admin
for the router User Name and
password
for the router
Password, both in lowercase letters. (For security reasons, the router has its own user name
and password.)
The factory default state is restored when you use the Factory Restore button. See
“Restoring the Default User Name and Password” on page 34 for more information.
You can enter any one of two addresses to connect to your wireless router:
http://www.routerlogin.net
or
http://www.routerlogin.com.
Figure 11
The router user name and password are not the same as any user name or
password you may use to log in to your Internet connection.