background image

WG103 ProSafe 802.11g Wireless Access Point Reference Manual

4-10

Managing Your Network

v1.0, February 2009

Viewing Statistics

To view the network traffic statistics for the wired (Ethernet LAN) and wireless (WLAN) 
interfaces of the wireless access point:

1.

Log in to the wireless access point at its default LAN address of 

http://192.168.0.229

 with its 

default user name of 

admin

 and default password of 

password

, or using whatever password 

and LAN address you have chosen for the wireless access point.

2.

Select 

Monitoring 

Statistics

. The Statistics screen displays (see 

Figure 4-9 on page 4-11

). 

Table 4-2 on page 4-11

 describes the statistics fields.

Current IP Settings

 

You can configure these settings in 

“Configure Basic IP Settings” on page 2-7

.

IP Address

The IP address of the wireless access point.

Subnet Mask

The subnet mask for the wireless access point.

Default Gateway

The default gateway for the wireless access point communication.

DHCP Client

If this is enabled, the current IP address was obtained from a DHCP 
server on your network. Disabled indicates a static IP configuration.

Current Wireless Settings 

Access Point Mode

The operating mode of the wireless access point: access point, point-
to-point bridge, multi-point bridge, or repeater. To change these 
settings, see 

“Wireless Bridging and Repeating” on page 5-9

.

Channel/Frequency

The channel the wireless port uses. The default channel setting is 
automatic channel selection. To change these settings, see 

“Configure 

Basic Wireless Settings” on page 2-8

. For the frequencies used on 

each channel, see the online document that you can access from 

“Wireless Networking Basics” in Appendix B

.

Rogue AP Detection

Indicates whether rogue AP detection is enabled or not. To change 
these settings, see 

“Enabling Rogue AP Detection” on page 4-19

.

Table 4-1.  System Information Fields (continued)

Field 

Description

Summary of Contents for WG103 ProSafe

























































































































Reviews: