WG103 ProSafe 802.11g Wireless Access Point Reference Manual
3-14
Wireless Security
v1.0, February 2009
6. Wireless Client Security Separation if required
.
Enable this option, if required. (For more
information, see
“Security Profiles” on page 3-3
.)
7. VLAN ID
. Enter the VLAN ID associated with this profile.
8.
To save your settings, click
Apply
.
For more information about WPA, see the online document that you can access from
“Wireless
Networking Basics” in Appendix B
.
Restricting Wireless Access by MAC Address
For increased security, you can restrict access to the wireless network to allow only specific
computers or wireless cards based on their MAC addresses. You can restrict access to only trusted
computers so that unknown computers cannot wirelessly connect to the wireless access point.
MAC address filtering adds an obstacle against unwanted access to your network, but the data
broadcast over the wireless link is fully exposed.
To restrict access based on MAC addresses:
1.
Log in to the wireless access point at its default LAN address of
http://192.168.0.229
with its
default user name of
admin
, and default password of
password
, or using whatever password
and LAN address you have chosen for the wireless access point.
Note:
For wireless adapters, you can usually find the MAC address printed on the
wireless adapter.
Note:
When configuring the wireless access point from a wireless computer whose
MAC address is not in the access control list, if you select Turn Access Control
On, you will lose your wireless connection when you click Apply. You must
then access the wireless access point from a wired computer or from a wireless
computer which is on the access control list to make any further changes.
