Factory Default Settings
You can reset the base station to the factory default settings, which are shown in the following table.
For more information about resetting the base station to its factory settings, see
on page 40.
The following tables show the factory default settings of the base station and the camera.
Table 3. Base station factory default settings
Default Setting
Feature
FlexPowerBS-xxx
The xxx represent the last three digits of the base station serial number,
which is on the base station label.
User login domain name
The base station does not require a user name.
User name
password
You must change this password when you access the base station for the
first time.
Login password
(case-sensitive)
Enabled so that the base station receives an IP address from a DHCP server
in the network.
DHCP client
Automatically detected through a default NTP server.
System time
None configured.
Email settings and
notifications
Table 4. Camera factory default settings
Default Setting
Feature
admin
User name
password
Login password
(case-sensitive)
Enabled so that the camera receives an IP address from a DHCP server in
the network.
DHCP client
Factory Default Settings and Technical Specifications
67
FlexPower ONVIF Wire-Free IP Camera and Base Station User Manual
