manualshive.com logo in svg

NETGEAR VNB4000-111PAS, User Manual

Share
Download
NETGEAR VNB4000-111PAS User Manual Download Page 21

Access and Test the Base Station Camera Feeds

After you set up your camera with the base station, you can access the camera feeds.

To access and test the base station camera feeds:

1.

Open a web browser from a computer or mobile device that is connected to the same LAN as the base
station.

If you are unable to connect to the same LAN using WiFi, use an Ethernet cable to connect a computer
to the same router or switch as the base station.

2.

Enter the domain name or IP address of the base station.

If you do not know the domain name or IP address, see 

Access the Base Station for the First Time

 on

page 16.

A login window opens.

3.

Enter the base station password.

The password is the one that you specified the first time that you logged in. The password is
case-sensitive.

The Dashboard page displays.

4.

To test the camera feed for a camera, click the associated Take Snapshot icon.

The snapshot refreshes and displays in the camera slot on the Dashboard page.

5.

Repeat Step 4 for all cameras that are synchronized with the base station.

For information about configuring camera settings, see 

Manage Camera Settings

 on page 43.

Save the Local Browser Interface of the Base Station as
a Web App

You can access the local browser interface and manage the FlexPower base station from your mobile device.
The local browser interface is specifically designed to be easily accessible from a computer, smartphone,
or tablet.

To save the local browser interface of the base station as a web app:

1.

Connect your mobile device to a WiFi network that, in turn, is connected to the same LAN as the base
station.

If the WiFi network is not connected to the the same LAN as the base station, see 

Access the Local

Browser Interface of the Base Station From Outside Your Network

 on page 22.

2.

Open a web browser from your mobile device.

3.

Enter the domain name or IP address of the base station.

If you do not know the domain name or IP address, see 

Access the Base Station for the First Time

 on

page 16.

Install the System Components and Access the Base Station

21

FlexPower ONVIF Wire-Free IP Camera and Base Station User Manual

Summary of Contents for VNB4000-111PAS






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands