manualshive.com logo in svg

NETGEAR VNB4000-111PAS, User Manual

Share
Download
NETGEAR VNB4000-111PAS User Manual Download Page 29

Set Up Email Notifications

After you set up the SMTP server settings for the base station (see 

Configure the Base Station SMTP Server

Settings

 on page 26), you can configure the base station to send an email notification if a low-battery

condition or weak signal occurs for a camera, if a camera goes offline, or if new firmware is available.

To set up email notifications:

1.

Open a web browser from a computer or mobile device that is connected to the same LAN as the base
station.

If you are unable to connect to the same LAN using WiFi, use an Ethernet cable to connect a computer
to the same router or switch as the base station.

2.

Enter the domain name or IP address of the base station.

If you do not know the domain name or IP address, see 

Access the Base Station for the First Time

 on

page 16.

A login window opens.

3.

Enter the base station password.

The password is the one that you specified the first time that you logged in. The password is
case-sensitive.

The Dashboard page displays.

4.

Click the Main Menu icon and select Email Notifications.

The Email Notifications page displays.

5.

Select one or more Alerts check boxes.

6.

Click the APPLY button.

Your settings are saved.

7.

Click the Close icon.

The Dashboard page displays.

Reset the Email Notifications Configuration

You can reset the email notifications configuration to the default settings so that you can reconfigure the
SMTP server settings, email recipients, and notification settings.

To reset the email notifications configuration to the default settings:

1.

Open a web browser from a computer or mobile device that is connected to the same LAN as the base
station.

If you are unable to connect to the same LAN using WiFi, use an Ethernet cable to connect a computer
to the same router or switch as the base station.

2.

Enter the domain name or IP address of the base station.

If you do not know the domain name or IP address, see 

Access the Base Station for the First Time

 on

page 16.

A login window opens.

Manage Base Station Settings

29

FlexPower ONVIF Wire-Free IP Camera and Base Station User Manual

Summary of Contents for VNB4000-111PAS






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands