Reference Guide for the Model RO318 Cable/DSL Security Router
Setting Up the Hardware
2-3
The Router’s Front Panel
The front panel of the Model RO318 router (
Figure 2-1
) contains status LEDs.
Figure 2-1.
RO318 Front Panel
You can use some of the LEDs to verify connections.
Table 2-1
lists and describes each LED on
the front panel of the Model RO318 router. These LEDs are green when lit.
Table 2-1.
LED Descriptions
Label
Activity
Description
PWR (Power)
On
Off
Power is supplied to the router.
Power is not supplied to the router.
TEST
On
Off
Blinking
The system is not ready or has failed to start up.
The system is ready and running.
The system is initializing.
WAN
LNK
On
The WAN port has detected a link with an attached device.
ACT (Activity)
Blinking
Data is being transmitted or received by the WAN port.
LAN
LNK/ACT
(Link/Activity)
On
Blinking
The LAN port has detected a link with an attached device.
Data is being tranmitted or received by the LAN port.
100 (100 Mbps)
On
Off
The LAN is operating at 100 Mbps.
The LAN is operating at 10 Mbps.
Summary of Contents for RO318
