Replace the On-Board Battery
To replace the battery:
1.
Open the system and locate the battery holder.
The following figure shows the location of the battery holder for the ReadyNAS 3302 and 4220 systems.
The battery holder in the ReadyNAS 2312 system is located toward the front left corner of the enclosure.
2.
Remove the old battery.
3.
Install the new battery.
Take care to install the new battery with the correct side up.
Replace a Fan
You cannot replace the fans on the RR2312. Contact NETGEAR Technical Support for assistance.
Replace a Power Supply
You cannot replace the power supply on the RR2312. Contact NETGEAR Technical Support for assistance.
Maintenance
28
ReadyNAS OS 6
