8-Port or 16-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch
Hardware Setup
User Manual
9
Switch front panel
The switch provides eight 100M/1G/10G copper RJ-45 ports, of which port 8T and slot 8F
form a shared (combo) port. The 1G/10G SFP+ slots (8F) accept fiber modules. You use
either port 8T or port
8F. Each copper RJ-45 port is capable of sensing the line speed and
negotiating the duplex mode with the link partner automatically.
XS708Ev2 front panel
The following figure shows the front panel of the switch.
Power and
Factory
Defaults button
Fan LEDs
100M/1G/10G RJ-45 ports
SFP+ slot
Figure 3. XS708Ev2 switch front panel
From left to right, the front panel contains the following components:
•
Power and Fan LEDs.
•
Recessed
Factory Defaults
button to restore the device back to the factory defaults.
•
Eight RJ-45 connectors for 100M/1G/10G AutoSensing 10-Gigabit Ethernet switching
ports.
•
One port (8) is a combo port: You can either use port 8T as Gigabit Ethernet switching
port or you can install a fiber module in 1G/10G SFP+ slot 8F.
•
Speed and Activity (ACT) LEDs for each port.