8-Port or 16-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch
Manage and Monitor the Switch
User Manual
76
•
Link-Down Power Saving
. By default, the
Enable
radio button is selected. To
disable link-down power saving, select the
Disable
radio button.
7.
Click the
Apply
button.
Your settings are saved.
Upgrade the firmware
You can check for the latest firmware version for your switch. Visit
netgear.com/support/download/ and
enter in your product model number in the
Enter a
Product Name/Model Number
field.
Read the new firmware release notes to find out if you must reconfigure the switch after
upgrading. The firmware upgrade method depends on the current firmware and boot loader
versions on your switch.
Use the local browser interface to upgrade the firmware
To upgrade the firmware:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
.
The login window opens.
4.
Enter the switch’s password in the
password
field.
The switch’s default password is
password
.
The Switch Information page displays.
5.
Select
System > Maintenance > Firmware Upgrade
.
The Firmware Upgrade page displays.
6.
Click the
Browse
button and locate and select the new firmware image file.
7.
Click the
Apply
button.