manualshive.com logo in svg

NETGEAR PROSAFE XS708Ev2, User Manual, Page: 5 / 97

Share
Download
NETGEAR PROSAFE XS708Ev2 User Manual Download Page 5

8-Port or 16-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch 

 

User Manual

5

Chapter 6

 

Manage and Monitor the Switch

Manage flow control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Use the local browser interface to manage flow control. . . . . . . . . . . . .69
Use the ProSAFE Plus Utility to manage flow control  . . . . . . . . . . . . . . .70

Manage the port speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Use the local browser interface to specify the port speed 

or shut down a port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Use the ProSAFE Plus Utility to specify the port speed or 

shut down a port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Enable loop detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Use the local browser interface to enable loop detection . . . . . . . . . . .73
Use the ProSAFE Plus Utility to enable loop detection . . . . . . . . . . . . . .74

Manage Energy Efficient Ethernet and other power saving options . . . . .74
Upgrade the firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

Use the local browser interface to upgrade the firmware  . . . . . . . . . . .76
Use the ProSAFE Plus Utility to upgrade the firmware  . . . . . . . . . . . . . .77

Reboot the switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Use the local browser interface to reboot the switch  . . . . . . . . . . . . . . .78
Use the ProSAFE Plus Utility to reboot the switch  . . . . . . . . . . . . . . . . . .79

Save the switch configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

Use the local browser interface to save the switch configuration . . . . .79
Use the ProSAFE Plus Utility to save the switch configuration . . . . . . . .80

Restore a saved switch configuration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

Use the local browser interface to restore a saved switch 

configuration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Use the ProSAFE Plus Utility to restore a saved switch configuration . .82

Restore factory default settings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

Use the local browser interface to restore factory settings. . . . . . . . . . .82
Use the ProSAFE Plus Utility to restore factory settings. . . . . . . . . . . . . .83

Enable port mirroring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

Use the local browser interface to enable port mirroring. . . . . . . . . . . .84
Use the ProSAFE Plus Utility to enable port mirroring. . . . . . . . . . . . . . .85

View switch information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

Use the local browser interface to view switch information . . . . . . . . . .86
Use the ProSAFE Plus Utility to view switch information . . . . . . . . . . . . .87

View the port statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88

Use the local browser interface to view and clear the port statistics. . .88
Use the ProSAFE Plus Utility to view and clear the port statistics  . . . . .89

Chapter 7

 

Diagnostics and Troubleshooting

Test cable connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92

Use the local browser interface to test a cable connection . . . . . . . . . .92
Use the ProSAFE Plus Utility to test a cable connection . . . . . . . . . . . . .93

Resolve a subnet conflict to access the switch. . . . . . . . . . . . . . . . . . . . . . . .94

Summary of Contents for PROSAFE XS708Ev2


































































































Reviews:

No comments