8-Port or 16-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch
Use VLANS for Traffic Segmentation
User Manual
66
4.
Enter the switch’s password in the
password
field.
The switch’s default password is
password
.
The Switch Information page displays.
5.
Select
VLAN > 802.1Q > Advanced > VLAN Configuration.
The Advanced 802.1Q VLAN Status page displays. The menu on the left displays more
options.
6.
Select
Port PVID
.
You can select
Port PVID
only if you already enabled the advanced 802.1Q VLAN option
(see
Create 802.1Q-based VLANs in an advanced configuration on page
7.
Select one or more ports.
8.
Enter the PVID.
You can enter a PVID only for a VLAN that already exists.
9.
Click the
Apply
button.
Your settings are saved.
Use the ProSAFE Plus Utility to assign a PVID to ports
To assign a PVID to one or more ports:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2.
Double-click the
ProSAFE Plus Utility
icon.
The Switch Selection page displays a list of Web Managed switches that it discovers on
the local network.
3.
Select the switch.
If you do not see the switch, click the
REFRESH
button.