8-Port or 16-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch
Manage and Monitor the Switch
User Manual
85
6.
In the Destination Port section, select the destination port by selecting the check box under
the port number.
You can select a single destination port only. You cannot select a destination port that is a
member of a LAG.
7.
In the Source Port section, select one or more source ports by selecting the check boxes
under the port numbers.
You can select more than one source port. You cannot select a source port that is a
member of a LAG.
8.
Select the Mirror Status
Enable
radio button.
9.
Click the
Apply
button.
Your settings are saved.
Use the ProSAFE Plus Utility to enable port mirroring
To enable port mirroring:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2.
Double-click the
ProSAFE Plus Utility
icon.
The Switch Selection page displays a list of Web Managed switches that it discovers on
the local network.
3.
Select the switch.
If you do not see the switch, click the
REFRESH
button.
4.
Click the
APPLY
button.
You are asked to enter the password for the switch.
5.
Enter the switch’s password in the
password
field.
The switch’s default password is
password
.
The Switch Status page displays.
6.
Select
System > Monitoring > Mirroring
.