manualshive.com logo in svg

NETGEAR ProSafe FWAG114, Reference Manual

Share
Download
NETGEAR ProSafe FWAG114 Reference Manual Download Page 99

Reference Manual for the ProSafe Dual Band Wireless VPN Firewall FWAG114

Virtual Private Networking

7-27

 

Now, the traffic from devices within the range of the LAN subnet addresses on FWAG114 A 
and Gateway B will be authenticated using the certificates rather than via a shared key.

8. Set up Certificate Revocation List (CRL) checking.

a.

Get a copy of the CRL from the CA and save it as a text file.

Note: 

The procedure for obtaining a CRL differs from a CA like Verisign and a CA such 

as a Windows 2000 certificate server, which an organization operates for providing 
certificates for its members. Follow the procedures of your CA.

b.

From the main menu VPN section, click on the CRL link.

c.

Click Add to add a CRL.

d.

Click Browse to locate the CRL file.

e.

Click Upload.

Now expired or revoked certificates will not be allowed to use the VPN tunnels managed by 
IKE policies which use this CA. 

Note: 

You must update the CRLs regularly in order to maintain the validity of the 

certificate-based VPN policies.

Summary of Contents for ProSafe FWAG114

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands