NETGEAR ProSafe FWAG114, Reference Manual

Page: 28 / 192

Reference Manual for the ProSafe Dual Band Wireless VPN Firewall FWAG114
3-8 Connecting the FWAG114 to the Internet
c.
When the router successfully detects an active Internet service, the router’s Internet LED
goes on. The Setup Wizard reports which connection type it discovered, and displays the
appropriate configuration menu. If the Setup Wizard finds no connection, you will be
prompted to check the physical connection between your router and the cable or DSL line.
d.
The Setup Wizard will report the type of connection it finds. The options are:
• Connections which require a login using protocols such as
PPPoE, DHCP, or Static IP broadband connections.
• Connections which use dynamic IP address assignment.
• Connections which use fixed IP address assignment.
The procedures for filling in the configuration menu for each type of connection follow
below.
PPPoE Wizard-Detected Option
If the Setup Wizard discovers that your ISP uses PPPoE, you will see this menu:
Figure 3-7: Setup Wizard menu for PPPoE accounts