NETGEAR ProSafe FWAG114 Page 179 Reference Manual Download

Page: 179 / 192

Reference Manual for the ProSafe Dual Band Wireless VPN Firewall FWAG114

Virtual Private Networking

E-13

•

[RFC 791]

Internet Protocol DARPA Internet Program Protocol Specification

, Information

Sciences Institute, USC, September 1981.

•

[RFC 1058]

Routing Information Protocol

, C Hedrick, Rutgers University, June 1988.

•

[RFC 1483]

Multiprotocol Encapsulation over ATM Adaptation Layer 5

, Juha Heinanen,

Telecom Finland, July 1993.

•

[RFC 2401] S. Kent, R. Atkinson, Security Architecture for the Internet Protocol, RFC 2401,
November 1998.

•

[RFC 2407] D. Piper, The Internet IP Security Domain of Interpretation for ISAKMP,
November 1998.

•

[RFC 2474] K. Nichols, S. Blake, F. Baker, D. Black, Definition of the Differentiated Services
Field (DS Field) in the IPv4 and IPv6 Headers, December 1998.

•

[RFC 2475] S. Blake, D. Black, M. Carlson, E. Davies, Z. Wang, and W. Weiss, An
Architecture for Differentiated Services, December 1998.

•

[RFC 2481] K. Ramakrishnan, S. Floyd, A Proposal to Add Explicit Congestion Notification
(ECN) to IP, January 1999.

•

[RFC 2408] D. Maughan, M. Schertler, M. Schneider, J. Turner, Internet Security Association
and Key Management Protocol (ISAKMP).

•

[RFC 2409] D. Harkins, D.Carrel, Internet Key Exchange (IKE) protocol.

•

[RFC 2401] S. Kent, R. Atkinson, Security Architecture for the Internet Protocol.

Summary of Contents for ProSafe FWAG114

































































































































































































Search results

Summary of Contents for ProSafe FWAG114

Reviews:

Related manuals for ProSafe FWAG114

Brands by name

Popular brands

NETGEAR ProSafe FWAG114, Reference Manual

Search results

Summary of Contents for ProSafe FWAG114

Reviews:

Related manuals for ProSafe FWAG114

Brands by name

Popular brands