manualshive.com logo in svg

NETGEAR ProSafe FWAG114, Reference Manual

Share
Download
NETGEAR ProSafe FWAG114 Reference Manual Download Page 68

Reference Manual for the ProSafe Dual Band Wireless VPN Firewall FWAG114

6-4

Maintenance

 

Click “Show Statistics” to display router usage statistics.

Figure 6-3:  Router Statistics screen

This screen shows the following statistics:

Table 6-1.

Router Statistics Fields 

Field

Description

interface

The statistics for the WAN (Internet), LAN (local), 802.11a, and 802.11b/g interfaces. 
For each interface, the screen displays:

Status

The link status of the interface.

TxPkts

The number of packets transmitted on this interface since reset or manual clear.

RxPkts

The number of packets received on this interface since reset or manual clear.

Collisions

The number of collisions on this interface since reset or manual clear.

Tx B/s

The current transmission (outbound) bandwidth used on the interfaces.

Rx B/s

The current reception (inbound) bandwidth used on the interfaces.

Up Time

The amount of time since the router was last restarted.

Up Time

The time elapsed since this port acquired the link.

Poll Interval

Specifies the intervals at which the statistics are updated in this window. Click on Stop 
to freeze the display.

Summary of Contents for ProSafe FWAG114

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands