NETGEAR PR2000 User Manual Download Page 73

Page: 73 / 149

USB Port

Trek N300 Travel Router and Range Extender PR2000

Select

BASIC > ReadySHARE

Click the

Safely Remove USB Device

button.

This takes the drive offline.

Physically disconnect the USB drive.

View or Configure a USB Drive

You can view or configure your USB storage device:

•

View the basic information about the drive.

•

Set up the device name, workgroups, and network folders.

•

View or change the network folders.

•

For more security, share only approved USB devices.



To view basic information about the USB storage device:

Launch your browser from a computer or wireless device that is connected to the Trek.

Enter

www.routerlogin.net

www.routerlogin.com

in the web browser address bar.

The login screen displays.

Enter the Trek user name and password.

The user name is

admin

. The default password is

password

. The user name and

password are case-sensitive.

Click the

button.

The BASIC Home screen displays.

Summary of Contents for PR2000






















































































































































Search results

Summary of Contents for PR2000

Reviews:

Related manuals for PR2000

Brands by name

Popular brands

NETGEAR PR2000, User Manual

Search results

Summary of Contents for PR2000

Reviews:

Related manuals for PR2000

Brands by name

Popular brands