NETGEAR Orbi LBR1020 User Manual Download

Page: 151 / 171

Set LED lighting brightness

After you turn on the satellite’s LED lighting, you can set its brightness percentage.

To set the satellite’s LED lighting brightness:

1. Launch a web browser from a computer or mobile device that is connected to your

Orbi network.

2. Enter orbilogin.com.

A login window opens.

3. Enter the router admin user name and password.

The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.

The BASIC Home page displays.

4. Select Attached Devices.

The Attached Devices page displays.

5. Select your satellite.

The Edit Device page displays.

6. Make sure that the LED On/Off slider is set to ON.

7. If the LED lighting is turned off, click the LED On/Off slider to turn the LED on.

The top and bottom Light LEDs turn on.

8. Select an LED lighting brightness percentage from the LED Lighting Brightness

menu.

9. Click the APPLY button.

Your settings are saved.

Schedule when to turn on LED lighting

You can schedule when to turn on the satellite’s LED lighting:

To schedule the LED lighting:

1. Launch a web browser from a computer or mobile device that is connected to your

Orbi network.

2. Enter orbilogin.com.

A login window opens.

3. Enter the router admin user name and password.

User Manual

151

Set Up and Manage an Optional
Orbi Satellite

Orbi 4GX Router Model LBR1020

Summary of Contents for Orbi LBR1020












































































































































































Search results

Summary of Contents for Orbi LBR1020

Reviews:

Related manuals for Orbi LBR1020

Brands by name

Popular brands

NETGEAR Orbi LBR1020, User Manual

Search results

Summary of Contents for Orbi LBR1020

Reviews:

Related manuals for Orbi LBR1020

Brands by name

Popular brands