NETGEAR Orbi LBR1020 User Manual Download Page 142

Page: 142 / 171

Orbi AC satellite LED behavior

An Orbi AC satellite has a Power LED on the back and a Ring LED on the top.

The following table describes the LED behavior.

Note: The Orbi AC satellite model RBW30 does not include a Power LED.

Table 3. LED behavior for Orbi AC satellite

Description

LED color

Router is booting or Sync (WPS) button has been pushed.

Pulsing white

Internet connection is established.

Solid blue

Unable to connect to internet.

Solid amber

The satellite’s firmware is corrupted.

Pulsing red

88% to 99% of data is used.

White and orange
pulse

100%+ of data is used.

White and red pulse

Power is not supplied

Off

Place your satellite

Your satellite must be within range of your router’s WiFi signal in order for it to sync with
the router. Use the satellite’s ring LED to help you determine where to place your satellite.

Sync an add-on satellite

If you already set up the router and are adding an optional add-on satellite (sold
separately), follow these steps.

To sync your add-on satellite:

1. Place your satellite.

Make sure that your satellite is within range of your router’s WiFi signal.

2. Connect the satellite to a power source.

User Manual

142

Set Up and Manage an Optional
Orbi Satellite

Orbi 4GX Router Model LBR1020

Summary of Contents for Orbi LBR1020












































































































































































Search results

Summary of Contents for Orbi LBR1020

Reviews:

Related manuals for Orbi LBR1020

Brands by name

Popular brands

NETGEAR Orbi LBR1020, User Manual

Search results

Summary of Contents for Orbi LBR1020

Reviews:

Related manuals for Orbi LBR1020

Brands by name

Popular brands