Connecting to the Internet
9
NETGEAR Mobile Broadband 11n Wireless Router MBR1310
Power/Test
Solid green
The router is powered on and operating normally.
Solid amber
POST (power-on self-test) in progress.
Off
Power is not supplied to the router.
Restore Factory Settings
button
Press the Restore Factory Settings button for 6 seconds. The
Power LED lights briefly. When the button is released, the LED
blinks red three times and then turns green as the router resets to
the factory defaults.
Internet
Solid green
There is an Internet session.
Solid red
There is no Internet connection.
Blinking green
Data is being transmitted over the Internet connection.
Blinking green and red
Traffic meter limit has been reached.
Off
No Internet connection detected or device in bridge mode.
WiFi
Solid blue
The WiFi local port is initialized.
Blinking blue
Data is being transmitted or received over the WiFi link.
Off
The wireless access point is turned off.
ACT
Solid green
The local Ethernet ports have detected wired links with computers.
Blinking
Data is being transmitted or received.
Off
No link is detected on these ports.
WAN
Solid green
The Ethernet WAN port has detected an active link.
Blinking
Data is being transmitted or received.
Off
No link is detected on this port.
2G/3G
Solid blue
The router is in 3G+ coverage.
Solid green
The router is in 2G coverage.
Off
No mobile broadband coverage is detected.
Signal Quality
Solid blue
Excellent mobile broadband coverage detected.
Solid green
Good mobile broadband coverage detected.
Solid amber
Marginal mobile broadband coverage detected.
Off
No mobile broadband coverage detected.
Button/LED
Activity
Description
