Advanced Settings
83
NETGEAR Mobile Broadband 11n Wireless Router MBR1310
2.
Select the radio button of the static route you want to configure.
3.
Click
Add
or
Edit
to display the following screen:
4.
Fill in or change the fields:
•
Route Name
.
The route name is for identification purposes only.
•
Private
. Select this check box if you want to limit access to the LAN only.
The static route will not be reported in RIP.
•
Active
. Select this check box to make this route effective.
•
Destination IP Address
, and
IP Subnet Mask
. If the destination is a single host,
type a subnet value of
255.255.255.255
.
•
Gateway IP Address
. This has to be a router on the same LAN segment as the
router.
•
Metric
. Type a number between 2 and 15. This represents the number of routers
between your network and the destination. Usually, a setting of 2 or 3 works, but if this
is a direct connection, set it to 1.
5.
Click
Apply
to save your changes. If you added a static route, it is added to the Static
Routes screen.
Enable Remote Management
Using the Remote Management screen, you can allow a user or users on the Internet to
configure, upgrade, and check the status of your router.
Tip:
Be sure to change the router default password to a very secure
password. The ideal password should contain no dictionary words from
any language, and should be a mixture of letters (both upper case and
lower case), numbers, and symbols. Your password can be up to 30
characters.
